The first and fastest 2 minute glue on system in the world. Now being used by several master farriers shoeing for top thoroughbred trainers in the USA. Used for tender footed thin soled racehorses or just to maintain good sound hoof wall by driving fewer nails. Proven to help reduce or stop soreness or heat in the legs and hooves after racing or training. Available in most of our front racing plate styles and many of our competition shoes. Very economical and easy to use.
(Concept: B. Rynearson)

Each kit contains:
1 pair of thorobred sticky bonded shoes
1 bottle of thorogrip
1 bottle of cleaner and accelerator
2 pair of latex gloves and instructions.

Easy to apply:
Trim and rasp the hoof level.
Shape and flatten shoe to match hoof - leave no gaps.
Wipe shoe and hoof with accelerator.
Allow to dry.
Rest hoof on clean surface while applying glue to shoe.
Place shoe on hoof and hold firmly for 10-15 seconds until sticky.
Lower hoof to ground and lift opposite hoof for 30-45 sec.
Then tap in clips on glued shoe and spray accelerator on any excess glue.
Lift and finish.
Adding a nail to each shoe branch will assure job four to eight weeks when learning this application.
(ThoroGrip bonds well to acrylics).

The LEGACY series of Thorobred Front Racing Plates brings together many new features that farriers demand. More nail holes, a better shape, a deeper fullering that carries right through the heels and also seats the nail heads tight. Our new LEGACY is thicker, wider and stronger than traditional racing plates. The Sole relief is improved with a better tapered design to help reduce sole pressure. Available in sizes 4-5-6-7.

The LOW TOE is used on hard or fast tracks. It provides traction with less strain on tendons and ligaments. Available in front only. Thoro'Bred sizes 3 - 4 - 5 - 6 -7 - 8. 5 Nail Hole Pattern in Thoro'Bred Sizes 5 - 6 - 7 - 8.

The QUEENS PLATE XT has a raised toe, only .080 of an inch above the aluminum surface. Not enough to create a positive toe grab, but just enough to increase the traction and wear. Sizes: 3 - 4 - 5 - 6 - 7 - 8. 5 Nail Hole Pattern in Sizes 5 - 6 -7 - 8.

Shoeing all competition horses for top performance requires experienced farriers who under-stand anatomy and conformation, especially in the legs and hooves. Knowing where the center of the hoof is in order to place the shoe where the break over point is located is extremely important.

Sold in pairs, front only, sizes: 4 - 5 - 6 - 7

This is our original style of our Hunter-Jumper shoes. The shoes are made in half size longer in the heels to fit more horses properly. All have side clips and steel wear blank in the toe area, and sole relief.
(Concept: R. Peacock)

The Lite Champion features are:

• Hot forged side clips to help hold fast in the heat of competition.
• Steep angled heels for support, and made a half size longer for proper fit.
• Sole pressure relief.
• Heat treated for extra strength and wear.
• Lighter than titanium

Available in sizes: 00.5 - 0.5 - 1.5 - 2.5

These have many new innovative features compared to the originals. They're countersunk to lock all nail heads, and they have a broader toe area and wider sole relief.
(Concept: T. Curl and J. Miller)

Available in sizes: 0 - 1 - 2 - 3

The secret weapon of many champion barrel horse riders. Being lightweight and with the side notches, 80% of the barrel racers have improved their time with these shoes. They give the horse more confidence on a variety of arena surfaces.
(Concept: R. Dunivant)

Sizes: 000.5 - 00.5 - 0.5 - 1.5